AS/NZ 2271 EXTERIOR PINE PLYWOOD
Our Pine Exterior Plywood is manufactured to AS/NZS 2271 from plantation grown Hoop Pine and Klinki Pine veneers, using an “A” bond, WBP glue.
The product is certified by the Engineered Wood Products Association of Australia (EWPAA) under Certificate #916.
Technical Information
| Standard | AS/NZS 2271 Exterior Plywood |
| Sheet Dimensions | Length – 2400mm, Width – 1200mm Thickness 4, 6, 9, 12, 15, 17, 19 & 25mm |
| Veneer Grade | AC, BB, BC grades available. |
| Stress Grade | F14 |
| Treatment | ACQ H3 and H4 treatment is available. |
| Timber Species | Plantation grown Hoop Pine and Klinki Pine |
| Density | 14-20 kg/m2 |
| Moisture Content | 8% ~12% (despatch) |
| Tolerances | As per AS/NZS 2269 +/- 4% – sanded sheet over 7.5mm thick up to and including 17.5mm +/-3% – sanded sheet over 17.5mm thick |
| Glue | Phenolic Resin – AS 2754.1 |
| Bond | Type A – AS/NZS 2098.2, E0 formaldehyde emission class |
| Finish | Sanded both sides. B faces have minimal filled imperfection. C faces may have small filled or sanded imperfections. |
| Colour | Straw coloured in raw untreated state. |
| Edge Profile | Square Edged |
| Certification | Third party certification – Engineered Wood Products Association of Australia (EWPAA) – (Certificate #916) |
| Warranty | 40 years against glueline failure when used in correct application. |
| Advantages | High strength and stiffness to weight ratio; high dimensional stability; high panel shear; chemical resistance. |
