Zeeplex Filmfaced Plywood
Brown Filmfaced Plywood
Fast and easy. Add what you want to buy into the cart and fill in your contact details. We don’t
Add to wishlist
SELECT OPTIONS
This product has multiple variants. The options may be chosen on the product page
Unoplex Filmfaced Plywood
Crownplex Filmfaced Plywood
Merinoplex Filmfaced Plywood
Kingplus Filmfaced Plywood
Kingplex Filmfaced Plywood
Kingkong Filmfaced Plywood WBP
Russian Birch Filmfaced Plywood
Sveza Russian Birch Filmfaced Plywood
Kangaroo Filmfaced Plywood
Film-Faced Plywood or Phenolic Plywood
Film Faced Plywood
Film-faced birch plywood is high-quality plywood that is covered with treated resin paper which turns into a protective film during manufacture. This type of plywood is commonly used in construction and vehicle production since it is easy to mount and work with. It is easy to color, making it a popular choice for outdoor playground equipment and children’s furniture.
PHENOLIC PLYWOOD
Available Colors
phenolic plywood green 1
phenolic plywood light brown 1
phenolic plywood dark brown 1
phenolic plywood black
phenolic plywood gray
phenolic plywood white
phenolic plywood red 1
phenolic plywood yellow
phenolic plywood blue
Common Names: Birch, Russian birch
Botanical Name: Betula pendula
Sources: Latvia, Baltic Region
Euro Color Ply plywood is a Film-Faced or Phenolic coated Baltic Birch product, imported from Latvia. Both sides of the board are coated with a heat bonded, colored translucent phenolic film that leaves the wood grain visible. (Less visible in the darker colors)
Characteristics of overlay
Surface with an overlay is smooth, glossy and hard. It resists abrasion, it is weather and moisture proof and resists commonly used chemicals, dilute acids and alkalis. The surface is easy to clean with water or steam. Abrasion resistance according to the Taber test (EN 438-2): depends on applied film, conditions of product storage, thickness of film (see below) a.o.
Overlaid plywood’s wear resistance may be superior to 10’000.
Film color
Phenol films: dark brown (120, 130 (wear resistant) and 220g/m2), light brown (120g/m2), green (120g/m2), black (120g/m2), red (220g/m2), honey (120g/m2), UV resistant films: opal white (174g/m2).
Under transparent films BB grade veneer can be applied.
Features
Durable surface with an architectural edge which eliminates the need for edge-banding
Colored, translucent film leaving the wood grain visible (Black, Dark-Brown, Light Brown, Green, Red)
Smooth surface, easily cleaned and odor free panel suitable for food products
Rigid and structural properties
Euro Color Ply is an ideal material for the furniture and joinery industries. Its features provide smooth and superior surfaces that are ready for use. The panels are rigid and often used for making jigs and tooling as they are extremely durable.
Advantages
Environmentally friendly, durable, easily workable, hygienic, odor free, easy-to-clean, wear-resistant, weather- and water-proof, resists commonly used chemicals. Riga Form for shuttering can be re-used many times.
Applications
Desks, table tops, shelves
Fittings for kitchens, offices, shops
Garden furniture
Signs, billboards
Jigs and tooling
Trees grow slowly in the Eastern European climate and thus the wood it produces is close-grained and of consistent high quality. Birch is of uniform consistency and it has excellent strength, peeling and gluing properties. Phenol Formaldehyde glue used to laminate the plies is safe and water-resistant, making these Exterior Grade panels.
Thickness Size Cut/Color Cut
1/4″ 8’x4′ Brown-Dark Latvian Birch 6 mm Veneer
1/4″ 8’x4′ Black Latvian Birch 6 mm Veneer
1/2″ 8’x4′ Black Latvian Birch 12 mm Veneer
1/2″ 8’x4′ Brown-Dark Latvian Birch 12 mm Veneer
1/2″ 8’x4′ Brown-Dark Latvian Birch 12 mm Veneer
1/2″ 8’x4′ Green Latvian Birch 12 mm Veneer
1/2″ 8’x4′ Red Latvian Birch 12 mm Veneer
3/4″ 8’x4′ Black Latvian Birch 19 mm Veneer
3/4″ 8’x4′ Brown-Dark Latvian Birch 19 mm Veneer
3/4″ 8’x4′ Brown-Light Latvian Birch 19 mm Veneer
3/4″ 8’x4′ Green Latvian Birch 19 mm Veneer
3/4″ 8’x4′ Red Latvian Birch 19 mm Veneer
3/4″ 8’x4′ White-Acid Cured Paint 19mm Veneer
3/4″ 8’x4′ Gray 19mm Veneer
3/4″ 8’x4′ Yellow Latvian Birch 19mm Veneer
3/4″ 8’x4′ Blue Latvian Birch 19 mm Veneer
1″ 8’x4′ Black Latvian Birch Veneer
1″ 8’x4′ Dark Brown Latvian Birch Veneer
Cut-to-size panels and machined panels available in accordance with the customers’ requirements.
M847108 main image
1/4″ Film Faced High Quality Birch with Black Hexa Pattern
Was
$99.99
Save: 20%
Now
$79.99
M847108
View Product
Add to Cart
M847111 main image
3/8″ Film Faced High Quality Birch with Black Hexa Pattern
Was
$115.63
Save: 14%
Now
$99.99
M847111
View Product
Add to Cart
M847211 main image
3/8″ Film Faced High Quality Birch with Blue Hexa Pattern
Was
$136.22
Save: 10%
Now
$122.73
M847211
View Product
Add to Cart
M847113 main image
1/2″ Film Faced High Quality Birch with Black Hexa Pattern
1/2″ Film Faced High Quality Birch with Black Hexa Pattern
Was
$124.99
Save: 12%
Now
$109.99
M847113
View Product
Add to Cart
M847213 main image
1/2″ Film Faced High Quality Birch with Blue Hexa Pattern
Was
$162.86
Save: 10%
Now
$146.73
M847213
View Product
Add to Cart
M852110 main image
3/8″ Film Faced High Quality Birch with Black Haircell Pattern
Was
$119.99
Save: 17%
Now
$99.99
M852110
View Product
Add to Cart
M852106 main image
1/4″ Film Faced High Quality Birch with Black Haircell Pattern
Was
$90.60
Save: 12%
Now
$79.99
M852106
View Product
Add to Cart
M852310 main image
3/8″ Film Faced High Quality Birch with Blue Haircell Pattern
Was
$153.57
Save: 10%
Now
$138.35
M852310
View Product
Add to Cart
M852113 main image
1/2″ Film Faced High Quality Birch with Black Haircell Pattern
Was
$124.99
Save: 12%
Now
$109.99
M852113
View Product
Add to Cart
M852313 main image
1/2″ Film Faced High Quality Birch with Blue Haircell Pattern
Was
$172.19
Save: 10%
Now
$155.13
M852313
View Product
Add to Cart
M846106 main image
1/4″ Film Faced High Quality Birch with Black Textured Phenolic
M846106
View Product
M846109 main image
3/8″ Film Faced High Quality Birch with Black Textured Phenolic
M846109
View Product
M846209 main image
3/8″ Film Faced High Quality Birch with Blue Textured Phenolic
M846209
View Product
M846112 main image
1/2″ Film Faced High Quality Birch with Black Textured Phenolic
M846112
View Product
M845109 main image
3/8″ Film Faced High Quality Birch with Black Smooth Phenolic
M845109
View Product
M845112 main image
1/2″ Film Faced High Quality Birch with Black Smooth Phenolic
M845112
View Product
M845115 main image
5/8″ Film Faced High Quality Birch with Black Smooth Phenolic
M845115
View Product
M845118 main image
3/4″ Film Faced High Quality Birch with Black Smooth Phenolic
M845118
View Product
M870006-PH01 main image
1/4″ High Quality Birch with Black Smooth Phenolic Backing
M870006-PH01
View Product
M870009-PH01 main image
3/8″ High Quality Birch with Black Smooth Phenolic Backing
M870009-PH01
View Product
M870012-PH01 main image
1/2″ High Quality Birch with Black Smooth Phenolic Backing
M870012-PH01
View Product
X11065 main image
6.5mm Film Faced High Quality Birch with Brown Smooth Phenolic
X11065
View Product
X11065H main image
6.5mm Film Faced High Quality Birch with Brown Hexa Pattern
X11065H
View Product
X11065S main image
6.5mm Film Faced High Quality Birch with Black Smooth Phenolic
X11065S
View Product
X11090 main image
9mm Film Faced High Quality Birch with Brown Smooth Phenolic
X11090
Formwork Plywoods
Formwork Plywood: Phenolic film faced plywood
Stock thickness: 12mm-18mm (full pallets only)
Stock panel size: 2440x1220mm (full pallets only) – larger available if smooth face to one side only
Smooth surface resistant to chemicals including freshly-poured concrete
Up to 100 reuses possible with stock item
Smooth film coating also available single-sided as the reverse of phenolic slip-resistant plywoods
Formwork plywoods are tough, waterproof and scratch resistant. They are designed to offer an improved quality of finish and help achieve multiple re-uses in concrete formwork,
When pouring concrete if cared for properly between uses, the smooth and chemical-resistant surface of these plywood panels can allow them to be reused up to 200 times.
Phenolic film faced plywoods are also used in the manufacture of furniture by customers who are aware of the product’s characteristics.
Slip-resistant plywood
Decorative slip-resistant flooring plywood – multiple decorative surface options available
Veneered Panels & Doors
Laminate faced plywood, MDF & fire doors
A wide range of decorative laminates, bonded onto any core type and supplied as full sheets or doors, or cut to size/machined to profile/pattern
Melamine faced birch plywood
Melamine faced birch plywood
Exterior birch plywood faced on both sides with a heavy duty, smooth white melamine film
Coloured polypropylene faced birch plywood
Coloured polypropylene faced birch plywood
Exterior birch plywood faced with UV-resistant polypropylene film with shallow ‘orange peel’ texture
Panel types
Winwood Products offers the following formwork plywoods:
Phenolic film faced birch plywood
Formwork Plywood: Phenolic film faced plywood
Stock thickness: 12mm-18mm (full pallets only)
Stock panel size: 2440x1220mm, larger in single-sided (see below)
Dark brown – sometimes stocked in black, light grey & dark grey
Other colours available to special order in multiple pallet quantites
Most often stocked with no branding/lettering on surface
Smooth surface resistant to chemicals including freshly-poured concrete
Up to 100 concrete pours possible if managed correctly
Smooth phenolic film faced plywoods are tough, waterproof and scratch resistant. They are designed to offer an improved quality of finish and help achieve multiple re-uses in concrete formwork, If cared for properly between pours, the smooth and chemical-resistant surface can allow them to be reused up to 100 times.
Although they are were originally designed for use with concrete formwork, as is often the case, these panels have since found a home in a wide range of unplanned uses, where the smooth, easy-clean surface is desirable.Customers that use the panels for this end-use are aware that the panel colours may vary, and that patches may be visible through the translucent film coating.
The panels are most often stocked in dark brown, but are often also available in black, light grey and dark grey. Other colours (e.g. blue, green, red, yellow) are available to special order in single multiple pallets per item. Also available single-sided as the reverse of our range of phenolic slip-resistant plywoods
These panels are often used in the manufacture of smooth faced furniture or sports rebound boards, although their use as rebound boards has all but disappeared, to be superseded in most cases by polypropylene faced birch plywood due to their better UV-stability performance.
Polypropylene faced concrete formwork plywood
Polypropylene faced concrete formwork plywood
Special order item in multi-pallet quantities
Thickness = 12mm, 15, 18mm, 21mm, 24mm
Standard panel sizes = 1200 / 1250 / 1350 / 1500 x 2440 / 2700 / 3000mm
Maximum size = 1500x4000mm and 2000x3000mm
Resilient surface suitable for multi-use concrete pours
Most often supplied on a birch plywood core, beech plywood core can also be supplied
Colour of surface coating at mills’s option
These plywoods are used to pour high quality concrete formwork and more than 200 reuses can be achieved with this product if stored & handled correctly.
The surface coating (approx. 1.5mm) offers easier separation from the concrete & easier cleaning, producing a uniform concrete surface colour & quality for every application. The panels are less sensitive to face damage and any scratches do not leave visible marks on the finished concrete.
NB: The colour of the surface coating is at the mill’s option and cannot be specified.
X11090S main image
9mm Film Faced High Quality Birch with Black Smooth Phenolic
X11090S
View Product
X11090SD main image
9mm Film Faced High Quality Birch with Black Diamond Pattern
X11090SD
View Product
X11120S main image
12mm Film Faced High Quality Birch with Black Smooth Phenolic
X11120S
View Product
X11150S main image
15mm Film Faced High Quality Birch with Black Smooth Phenolic
X11150S
View Product
X11180S main image
18mm Film Faced High Quality Birch with Black Smooth Phenolic
X11180S
View Product
M852118 main image
3/4″ Film Faced High Quality Birch with Black Haircell Pattern
Was
$169.99
Save: 12%
Now
$149.99
M852118
View Product
Add to Cart
Gluing classes
Plywood is glued with waterproof phenol formaldehyde resin adhesive. The weather and boiling water resistant bonding meets the requirements of the following standards:
rd EN 314 / 3 class
BS 1203 / H 4 (previously WBP)
DIN 68705 Part 3 / type BFU 100
Formaldehyde emission
In accordance with the standard EN 13986 the formaldehyde emission meets the Class E1 requirements (test method EN 717 Part 2). Plywood glued with phenolformaldehyde resins meets the CARB Phase 2 and Japanese 4-Star Regulation’s requirements.
Overlaying
A smooth phenol or an UV resistant film, which is hot-pressed onto the surface, is used as an overlay. The phenol film is composed of a basic paper which is impregnated with phenol resin. The UV resistant film is impregnated with a special thermosetting mixture of polymers containing amino resins. Overlaying with higher resistance to abrasion and multi-layer overlaying is also possible (respectively 240 g/m2, 440 g/m2, special wear resistant film, etc.). Multi-layer overlaying gives superior wear resistance.
Plywood Types
Hardwood Plywood
Hardwood Plywood
Softwood Plywood
Softwood Plywood
Phenolic
Phenolic Plywood
Information About Plywood
Core Infomation
Plywood Core Info
Matching Information
Plywood Matching Info
Slicing Information
Plywood Slicing Info
Gradient Information
Plywood Grading Info
FILM-FACED PLYWOOD FROM THOMES
Click to Expand
Film Faced Plywood
Film-faced plywood (also known as phenolic plywood) is a special type of plywood with both sides coated with a wear-resistant, waterproof film. The film is meant to protect the wood from harsh environmental conditions and extend the service period of the plywood. Film-faced plywood is called phenolic plywood because both sides are soaked in phenolic resin to create a durable, water-resistant, smooth, and stable surface.
Thomes offers many different colors of phenolic plywood:
Industry standards
Dark Brown Phenolic
Black Phenolic
Thomes also offers special colors of phenolic plywood:
Light brown Phenolic
Green Phenolic
Yellow Phenolic
Marine Blue Phenolic
Two basic versions of film-faced plywood are available at Thomes: film/film (F/F) and film/wire (F/W). Some of the benefits of phenolic plywood available at Thomes are:
Edges are sealed for longevity
Relatively low price
Longer shelf life
Higher resistance to cracking
Suitable for logo printing
Ideal solution for transport and construction industries
TWO BASIC VERSIONS ARE AVAILABLE
Film/Film (F/F)
Film Face PlywoodThis version is smooth on both sides and can be produced in multiple colors. F/F was first developed as a concrete forming panel, which remains its principal use. However, it can be used in any application where moisture resistance, strength, and abrasion resistance are required.
FILM/WIRE (F/W)
Film Face Plywood
F/W wire mesh plywood has a wire mesh surface on one side and is smooth on the other. It has the same strength and moisture-resistant properties as F/F film-faced plywood with the extra benefit of non-slip capabilities
In both versions, the edges are factory sealed with an acrylic sealant to minimize moisture ingress. Phenolic-coated plywood is available in:
Light brown Phenolic (Grammature: 117g/m2)
Black Phenolic (Grammature: 120 g/m2)
Yellow Phenolic (Grammature: 167 g/m2)
Green Phenolic (Grammature: 120 g/m2)
HEXA DESIGN PHENOLIC FILM
The Hexa option is an excellent choice for decorative flooring due to the hexagonal pattern. Both sides of the plywood are coated with a high-density paper film that is saturated with a phenol-formaldehyde resin for maximum anti-slip prevention. It can be coated in grey or brown film and is often used in the transportation industry as flooring due to its extreme slip- and wear-resistant properties. Common applications include:
Loading platforms
Trailers
Vans
Stages, stands, terraces
Scaffolding
Playground and sports facilities
APPLICATIONS OF FILM-FACED OR PHENOLIC PLYWOOD
DOMESTIC APPLICATIONS
Phenolic-coated plywood is used to make furniture such as chairs, tables, beds, and sofas. Film-faced plywood is water-resistant and will not warp or experience mechanical stress during the manufacturing process. Compared to normal plywood, film-faced plywood has more wear-resistant surfaces and is durable, making it ideal for use in constructing high-quality furniture.
These properties also make it a popular choice for constructing children’s toys.
INDUSTRIAL APPLICATIONS
Phenolic-coated plywood is used in the transportation industry for bus and truck flooring. According to the types of face/back, phenolic plywood can be divided into smooth and anti-slip film-faced plywood. Anti-slip phenolic plywood is used to create flooring materials for trucks, vehicles, and other platforms.
Another use is to make shuttering boxes. Due to the water-resistance of film-faced plywood, it is recommended for shuttering boxes because they are used to contain wet concrete during the drying process.
MAKE THOMES LTD. YOUR BALTIC BIRCH PLYWOOD SUPPLIER
Thomes is one of the largest North American importers and suppliers of Baltic Birch plywood. Our high-quality, attractive plywood is sourced from trusted producers that utilize conventional press technologies coupled with innovative coatings, allowing us to provide durable products. We strive to be more than just a wholesale supplier and instead provide unique product solutions. We find you the best option to solve your production requirements. Contact us today and let our team help you find the best phenolic plywood option for your operation.
