Bracing Plywood is a pinus species used for strengthening of building frames to reduce the risk of wind damage, allowing fo open planned design through the ability to provide bracing resistance to short wall lengths.

Applications: wall bracing.

Available sizes:

2440mm X 1200mm

2400mm X 900mm

2745mm X 1200mm

3000mm X 1200mm
2440 X 900 X 4MM F22 HWD BRACING
2440 X 900 X 4MM F22 HWD BRACING
$18.34 each

View

2440 X 1200 X 4MM F22 HWD BRACING
2440 X 1200 X 4MM F22 HWD BRACING
$24.46 each

View

2745 X 900 X 4mm F22 HWD BRACING PLY
2745 X 900 X 4mm F22 HWD BRACING PLY
$25.41 each

View

2745 X 1200 X 4MM F22 HWD BRACING
2745 X 1200 X 4MM F22 HWD BRACING
$28.18 each

View

3050 X 900 X 4MM F22 HWD BRACING
3050 X 900 X 4MM F22 HWD BRACING
$25.19 each

HARDWOOD BRACING PLYWOOD 3050 X 1200 X 4MM

onsitetimber.com.au
https://onsitetimber.com.au › … › Plywood
Hardwood bracing plywood (F22) is suitable for use in wall and roof bracing applications. Using bracing in timber framed buildings affords designers the …
A$1.00 · ‎In stock

Plywood Bracing 2745 x 1200 x 4mm F22 Hardwood

Blacktown Building Supplies
https://www.blacktownbuildingsupplies.com.au › product
Buy Plywood Bracing 2745 x 1200 x 4mm F22 Hardwood at Blacktown Building Supplies. Best Prices, Guaranteed Satisfaction. Pickup/Delivery – Shop Now!
4.6(667) · A$36.90 · ‎7-day returns

2440 x 1200mm 4mm F27 Hardwood Ply Brace

Bunnings
https://www.bunnings.com.au › 2440-x-1200mm-4mm…
SpecRite F27 Hardwood Ply Brace is a high strength hardwood ply designed for the structural bracing of buildings. Details. Guides & Documents …

Hardwood Brace Ply 4mm Thickness (price for pack lot)

jbmonline.com.au
https://www.jbmonline.com.au › hardwood-brace-ply
Hardwood Brace Ply (price per sheet) High strength and stiffness Lightweight Moisture resistance during construction Per pack 150 sheets ply bracing.
5.0(1) · A$29.70

F22-SmartBrace-Design-Guide-2023-Edition-1.pdf

Tilling Timber
https://www.tilling.com.au › uploads › 2023/06
PDF
Jun 2, 2023 — in AS 1684.2—2021 to calculate the bracing capacity for F22. SmartBrace brace ply for most of the common structural arrange- ments in …

Plybrace Hardwood Bracing F22 (As/Nzs-2269) Treated To …

Agnew Building Supplies
https://www.agnewbuildingsupplies.com.au › product
A product made especially for the structural bracing of houses. It is made with an ‘A’ bond glue line. Plywood Bracing is suitable for use in wall and roof …
A$18.82

Braceply F22 H2S treated Hardwood – Ply supply

plysupply.au
https://plysupply.au › Plywood
Imported hardwood brace plywood. Size: 2440 x 1220 Thickness: 4mm Standard: AS/NZS2269 Bond: A-bond-exterior Application: can applies structural bracing.
A$27.00 to A$3,750.00 · ‎In stock

Hardwood Ply Bracing F22 A-Bond
Bowens
https://www.bowens.com.au › 4mm-hardwood-ply-braci…
Hardwood Ply Bracing F22 A-Bond · Description. This ply bracing is an imported hardwood designed to brace timber framing. It is a high strength ply product that …
A$25.50 to A$43.68 · ‎30-day returns

Do I need any bracing / supports underneath a large plywood …

lumberjocks.com
https://www.lumberjocks.com › … › Joinery
May 17, 2022 — Definitely need some sort of bracing otherwise, that plywood will sag. Maybe wide edgebanding that provides strength-plus it will cover up the …

Bracing Plywood

Revolution Wood Panels
https://www.timberwoodpanelsbrendale.com.au › products
Bracing Plywood is available in 2440mm, 2745mm and 3050mm lengths and 900mm and 1200mm widths. It is available in a F11 Pinus or F22/F27 Hardwood plywood for …

3050 X 1200 X 4MM F22 HWD BRACING
3050 X 1200 X 4MM F22 HWD BRACING
$33.58 each
Plywood & Panel Supplies Pty Ltd www.plywoodandpanel.com.auABN 37 108 072 108 Version 30/06/2020 08:3923 Sudbury Street, Darra QLD 4076PO Box 3341, Darra QLD 4076 1DD STRUCTURAL BRACING PLYWOODPRODUCT SPECIFICATIONSProduct: DD STRUCTURAL BRACING PLYWOODVeneer Grade: D Grade (Face) and D Grade (Back)Standard: AS/NZS 2269: 2012 Plywood – StructuralStress Grade: F22/F27Veneer Timber Species: HardwoodCore Timber Species: HardwoodSheet Size: 2440 x 900mm, 2440 x 1200mm, 2745 x 900mm, 2745 x 1200mm,3050 x 900mm, 3050 x 1200mmThicknesses: 4mmDensity: 725kgs/m3 (approx.)Glue Bond: Permanent Type “A” Bond (Phenolic Resin)Formaldehyde: Emission “E0”Applications: Bracing in residential and commercial construction, garage linings,pallet protection, etc.PRODUCT DESCRIPTIONCommonly known as Brace Ply, this versatile product is regularly used in structural bracingapplications and the sheathing of frames providing additional strength to resist horizontal rackingforces such as high winds & the creation of a barrier to reduce air and moisture ingress.FinishingIn semi exposed exterior applications, the product must be adequately protected by the use of a suitable water based,exterior paint or stain on both sides of the sheet & edges, irrespective of whether the sides are exposed to the weather ornot. It’s recommended to contact a reputable paint supplier and follow the manufacturer’s instructions. Do not use oilbased products on this plywood as oil-based paints or stains may penetrate the surface veneer of the plywood and reactwith adhesives that bond the core veneers together. No warranty or guarantee is offered by Plywood & Panel Supplies PtyLtd (PPS) if oil-based paint or stain has been applied to the plywood. This plywood is not suitable for use in themanufacture of doors and no warranty/ guarantee is offered by PPS if this plywood is utilised in any application associatedwith the manufacture of doors.DisclaimerThe information provided herein is believed to be accurate but is not warranted to be, whether it originated with PPS ornot. This information cannot be warranted by PPS to be correct or appropriate for the recipient’s intended use. Recipientsare advised to confirm in advance of need that the information is correct, applicable and suitable to their circumstances.Always refer to manufacturers span tables for correct loadings.

I-Built™ Ply BracingNote: Bracing Units are based on P21 testing conducted by Scion and theEWPAA on behalf of New Zealand Wood Products.For further information on any of the I-Built™ product range and theirperformance, please contact the NZWOOD technical team on 0800 022 352January 2019Bracing Types:Bracing Panel fixing notes: Ply bracing elements are to be fixed into min 90 x 45 SG8 framing with maximum centres of 600mm andthat complies with NZS3604:2011 and the New Zealand Building Code. Ply bracing elements must meet NZBC B2 Durability requirements and should be treated to H3.2 (CCA)when used in high moisture areas or used externally. Untreated Ply bracing can be used in interior bracingapplications. Sheets should be fixed using 50mm x 2.8mm Galvanised flat head nails for direct fixing to framing at150mm CRS around the perimeter of the element and at 300mm centres through the centre. Use 60mm x2.8mm flat head nails when fixing over cavity battens. Screw fixings are not to be used. Minimum of Hot dipped galvanised nails are to be used when in contact with H3.2 CCA treated timber. Insome instances stainless steel fixings may be required depending on the situation or exposure zone. Whenstainless steel fixings are used they must be annular grooved. GIB Handibrac® hold-down fixings must be installed in accordance with the manufacturers fixing details fortimber or concrete floors to ensure bracing values are achieved. Refer to the installation details. A 3mm gap should be allowed for between Ply sheet edges to allow for anyexpansion in the Ply sheet.Brace Code Brace Type Min BraceLengthBU’s per m(Wind)BU’s per m(EQ)BP1 0.4m 7mm J-Ply 1 Side+ Hold down brackets 0.4m 85 101BP1 0.6m 7mm J-Ply 1 Side+ Hold down brackets 0.6m 88 99BP1 1.2m 7mm J-Ply 1 Side+ Hold down brackets 1.2m 121 123BPG 0.4m 7mm J-Ply 1 Side with 10mm Gib® Standardplasterboard lining other side + Hold down brackets 0.4m 90 102BPG 1.2m 7mm J-Ply 1 Side with 10mm Gib® Standardplasterboard lining other side + Hold down brackets 1.2m 159* 161** Note: Bracing Panels must not exceed 120 BU/m when used on a timber framed floor or 150 BU/m when on aconcrete floor slab/concrete perimeter foundation wall as per NZS3604:2011 Section 5.4.2.These bracing values can also be applied to any F8 Structural Ply panel with a minimum thickness of 7mmIBuilt’s Structural Plywood is manufactured in accordance with AS/NZS 2269:2012 Structural Plywood. This guideoutlines how to use structural Ply in bracing applications and provides fixing requirements and installationguidelines. It is important to consult the New Zealand Building Code (NZBC) and either contact NZWOOD fordetailed engineering questions or consult your engineer or local council.All IBuilt Structural Ply is independently certified by the Engineered Wood Products Association of Australasia(EWPAA). In addition, all IBuilt Ply is FSC (Forest Stewardship Council™) certified which provides assurance thatthe plywood is produced from well managed forests and other responsible sources. FSC certification assistsinstitutions in gaining green star rating which can be required for government and educational facilities.PO Box 13647, Onehunga, Auckland 1643Tech Info Line: 0800-022-352Phone: +64-9-276 7030Fax: +64-9-270 0504Email: sales@nzwoodproducts.co.nzwww.nzwoodproducts.co.nzAll products and relative statements within this document are subject to theapplicable products being installed in accordance with informationmentioned, and subject to any governing codes of practice. New ZealandWood Products retains the right to change specifications without notice.Every care has been taken in preparing the information contained withinthis publication, however, the company cannot accept responsibility for anyinaccuracies that may have arisen, and cannot accept liability for loss ordamage (either direct or consequential) arising out of or in relation to useor application of the said information.No part of this publication may be reproduced without prior written consentof New Zealand Wood Products Limited.The information contained in this brochure relates to specific J-Ply productsmanufactured by Juken New Zealand Limited. The span tables cannot beapplied to other plywood products however similar they appear.Installation of I-Built Ply Bracing SheetsGIB® Plasterboard for BPG BraceGIB HandiBrac® Ply Bracing panels should be fixed using 50mm x 2.8mm InstallationGalvanised flat head nails at 150mm centres around theperimeter of the sheet and at 300mm centres throughthe centre. Ply must be installed on timber framingconstructed in accordance with the NZBC to meet ClauseB1 Structure and Clause B2 Durability.(Timber framing constructed to the requirements ofNZS3604:2011 and treated to meet NZS3602:2003 willmeet the requirements of the NZBC).GIB® plasterboard when installed as bracing must beinstalled in accordance with GIB® Bracing Systemspecifications as detailed in the current GIB® Site Guide.Failure to follow GIB® Bracing System specificationscould result in the bracing panel not achieving therequired bracing resistance.GIB® sheets may be installed vertically or horizontally,with sheet edges touching, joints stopped and reinforcedin accordance with the GIB® Site Guide. Fix using 35mmx 6g GIB® screws @ 150mm crs to the perimeter of thesheet with corners fixed at 50, 100, 150, 225 and300mm crs from all corners. Fix screws @ 300 crs onintermediate supports as per GIB® Site Guide page 63.F8 Structural PlywoodTimber Floor – External WallConcrete Floor – External WallNEW ZEALAND WOOD PRODUCTS LIMTIED