• Thickness = 9mm-18mm
  (Special order = 6mm-30mm)
• Panel sizes = 1220x2440mm, 1525x3050mm
  (Special order to max 1525x3660mm)
• Wide range of colours
• Hard-wearing, stippled surface
• UV-resistant (rated 6-7 according to DIN 54004)
• EN 636-3 (fully exposed exterior applications)

This resilient laminated plywood is constructed from a strong, exterior-bonded birch plywood core with a polypropylene film applied to one or both faces. The covering is bonded to the core using an elastic two-part glue meeting EN 204 D4 for exterior applications.

The hard-wearing laminate coating is available in a range of colours and designs and is UV-resistant for good colour fastness (rated 6-7 according to DIN 54004). Some decors incorporate an additional lacquer coat.

In principle, any combination of the RAL Classic colours below can be applied to the surfaces.

Range of Colours

NB: Some of the following items are to special order in full pallets per item only.

Technical details (general)

• Construction:
  • Exterior birch plywood faced with a hard-wearing UV-resistant film with an ‘orange peel’ texture to its surface, offering fully exterior performance
• Standard thickness:
  • 6mm, 9mm, 12mm, 15mm, 18mm, 21mm, 24mm, 27mm, 30mm
    (plus surface coating)
• Standard sizes:
  • 1200 / 1220 / 1250 x 2400 / 2440 / 2500mm
  • 1200 / 1220 x 3000 / 3050 / 3300 / 3660mm
  • 1500 / 1525 x 2400 / 2440 / 3000 / 3050 / 3660mm
• Special sizes:
  • In principle, any size can be produced up to the maximum stated above, subject to minimum production quantity being met
• Surface coating:
  • UV-resistant film (approx 0.2mm) with slight stipple texture often described as similar to ‘orange peel’
  • Lacquered panels have satin sheen, while unlacquered are more matt finish
• Edge treatment:
  • Typically sealed with exterior acrylic paint to protect against moisture
• Wear rating:
  • Taber abrasion value = typical 1400R (EN 438-2)
• Tolerances:
  • Length/width:
    Typical: up to 1m @ ±1mm, up to 2m @ ±2mm , 2m & above @ ±3mm
  • Thickness (core plywood):
    Ranges from 4mm @ +0.3mm/-0.4mm to 50mm @ ±1.2mm
  • (Special tolerances by arrangement)
• Bonding Quality:
  • EN 314-2 Class 3 – Exterior
  • E1 (EN 13986) Low formaldehyde, CARB II, ULEF (Ultra Low Emitting Formaldehyde)
• Hazard class:
  • EN 636-3 – Exterior & high moisture applications
• Approximate weights of birch plywood core:

• 6mm =4.4 kg/m2
• 9mm =6.3 kg/m2
• 12mm =8.2 kg/m2
• 15mm =10.1 kg/m2
• 18mm =12.0 kg/m2
• 21mm =13.9 kg/m2
• 24mm =15.9 kg/m2
• 27mm =18.0 kg/m2
• 30mm =20.0 kg/m2