Home
Data
Contacts
BIG SIZE PLYWOOD
FOR MODERN INDUSTRIES
EUROFANGROUPSIBERIA LLC(EFGS)
The owner of the Anzhersky plywood plant is EuroFanGroupSiberia LLC.
Our young but energetic company was founded in 2020, when a decision was made to purchase the Anzhersky Plywood Mill.
Less than two years after the decision was made, a modern large format birch plywood plant with a capacity of 60,000 cubic meters per year was built on the basis of the Anzhersky Plywood Mill, located in the city of Anzhero-Sudzhensk, Kemerovo Region.
Anzhersky plywood plant is a high-tech, environmentally friendly production that meets the requirements of the modern world.
In 2024-2025, it is planned to launch the second stage with an increase in production capacity to 90,000 cubic meters per year.
We offer our customers a wide range of large format plywood 4x8x4 and 5×10* and special sizes* — 2×10, 3×10, 4×5, 4×10, 4×11, 5×6, 5×7, 5×8, 5×9, 5×11, the most demanding in concrete formwork, furniture and engineered flooring production, decorative panels, as well as in trailers, minivans, high-speed trains.
Large-format plywood is available in interior (MR) and exterior (WBP) glue, raw and coated with phenolic films of various patterns.
Our company has modern machines and high-precision devices: peeling and drying lines Fezer (Brazil), rib gluing equipment Takayama Engineering Ltd. (Taiwan), hot and cold press Yamamoto (Japan), grinding machines Anthon (Germany), laminating press Omeco (Brazil).
Our employees are experienced professionals in the plywood industry and help customers solve any issues related to production and shipment of finished goods.
EFGS products meet the requirements of Russian and international quality standards.
All products have passed the environmental safety assessment and have a formaldehyde emission class of E1.
We use high-quality birch wood from Siberia, which grows in the Kemerovo, Tomsk, Novosibirsk regions and the Krasnoyarsk Territory. We carefully monitor the harvesting and supply of wood.
EFGS RAW PLYWOOD
plywood
EFGS birch plywoodjs a high-quality structural material made from birch veneer 1.5 mmthick, as well as 1.15 and 1.9 mm for special products.
Ithas high strength and durability, fits well to processing and goes well with finishing materials. Save properties in a wide range of temperature — from -40 to + 50°C.
We produce plywood of the two types — INT and EXT, In the production of INTplywood, urea-formaldehyde adhesive is used, in the manufacture of EXTplywood, phenol-formaldehyde is used (WBP glue). The edges of INT plywood are lighter than EXT plywood.
plywood
Birch plywood is produced in five main grades:
B, S (I), BB (II), CP (III), C (IV).
INTplywood is used for furniture and interior decoration – where high moisture resistance is not required. This plywood is ideal for laser cuttingand is used in the production of dieboards, toys and souvenirs.
EXTplywood maintains properties in conditions of high humidity, doe not deform and does not soak. It is widely used in construction, wall paneling of vans and minivans, and engineered flooring production.
By type of surface machining, plywood is divided into sanded (S2S marking) and unsanded (NS).!n the direction of the surface fibers – to the longitudinal(fibers are along the long side of the sheet) and transverse(fibers along the short side of the sheet).
THE EFGS RAW PLYWOOD PRODUCT LINE INCLUDES THE MAIN FORMATS 5×10, 5×8, 4x8x4, 4×10, 5×5
AND ALL DERIVATIVE FORMATS MOST DEMANDED ON THE MARKET.
EFGS FILM FACES PLYWOOD
plywood
EFGS UPG film faced plywood — EXT high-quality birch plywood produced with WBP glue and coated with a special protective film. Due to this, the surface of the product is resistant to moisture, abrasion, chemicals, as well as to fungus and mold. The edges of plywood are protected with acrylic paint in the color of the film.
It is widely used in concrete formwork and for vehicle floors. Quickly mounted and easy to handle.
We offer film faced plywood with a smooth
and mesh surface, as well as with a hex pattern:
SMOOTH
WIREMESH
HEXA
THE EFGS FILM FACED PLYWOOD SIZES RANGE INCLUDES THE MAIN 4×8 AND 5×10 FORMATS,
AS WELL AS THE POPULAR 5×11, 5×8, 4×10, 2×8 FORMATS.
APPLICATION
INTERIOR
BIRCH
PLYWOOD EXTERIOR
BIRCH
PLYWOOD FILM FACED
BIRCH PLYWOOD
SMOTH FILM FACED
BIRCH PLYWOOD
WIREMESH
CONSTRUCTION
Slab formworks
Frame formworks
Formwork beams
Farms and agro constructions
Industrial floors, decking units
Scaffolding
Fencing units
Stairs, podiums, scenes
Pedestrian bridges, ramps
Trays for reinforced concrete
Exterior decoration
Interior decoration
Sports equipment, stadiums, stables
Playgrounds
Exhibition stands, shelving units
Road signs, billboards
Garden furniture
TRANSPORTATION
Buses
Trailers, semi-trailers
Vans
Minibuses
Campers
Horse trailers
Boats
Passenger trains
Aircrafts
Loading platforms
FURNITURE & INTERIOR
Cabinetry
Drawers
Upholstery
Trading equipment and furniture
Wall panels
HPL-panels
Engineered flooring
Flooring underlayment
Dieboards
Toys, souvenirs
Speakers
PACKAGING
Industrial packaging, cabel reels
Food packaging
Boxes for musical instruments
Boxes for flowers
OTHERS
Casting forms
SIZES, MM (FT)
610×2440, 625×2500 (2×8)
1000×3000 (3×10)
1220x2440x1220, 1250x2500x1250 (4x8x4)
1250×3050(4×10)
1250×3300 (4×11)
1500×1830, 1525×1830 (5×6)
1500×1830, 1525×2135 (5×7)
1500×2440,1525×2500 (5×8)
1525×2700,1500×2700 (5×9)
1500×3000,1525×3050(5×10)
1500×3300,1525×3300(5×11)
LENGTH / WIDTH TOLERANCES, MM
LENGTH/WIDTH OF PLYWOOD SHEETS, MM MAXIMUM DEVIATION, MM
100 < L/W < 780 ±1,0
1200 < L/W < 1350 ±3,0
1500 < L/W < 2500 ±4,0
2700 < L/W < 3660 ±5,0
THICKNESS AND NUMBER OF PLIES
NOMINAL THICKNESS, MM NUMBER OF PLIES LOWER VALUE (MIN), MM TOP VALUE (MAX), MM
3 3 2.5 3.3
4 3 3.5 4.3
5 5 4.5 5.3
6 5 5.4 6.4
6.5 5 5.9 6.9
7 5 6.4 7.4
8 7 7.35 8.45
9 7 8.35 9.45
10 7;9 9.3 10.5
11 9 10.3 11.5
12 9 11.3 12.5
14 9;11 13,15 14,65
15 11 14,15 15,65
16 11 15,15 16,65
17 13 16,1 17,7
18 11; 13; 15 17,1 18,7
20 15 19 20,8
21 13;15;7 20 21,8
24 15;17 22,9 24,9
27 19 25,8 28
28 19 26,8 29
30 21 28,7 31,1
35 25 33,6 36,2
38 25;27 36,5 39,3
40 29 38,4 41,4
SPECIFICATIONS OF UPG RAW PLYWOOD
THICKNESS, MM 3-40
GRADE B/BB (l/ll), S/BB (l/ll), BB/BB (ll/ll), BB/CP (ll/lll), BB/C (ll/IV), CP/CP (lll/lll), CP/C (lll/IV), С (IV)
SURFACE TYPE Sanded on both sides (S2S), sanded on one side (S1), unsanded (NS)
GLUE INT, EXT(WBP)
FORMALDEHYDE EMISSION CLASS E1
WATER RESISTANCE High (EXT)
DENSITY, KG/M3 640-700
MOISTURE CONTENT, % 5-11
Produced under TU 5512-002-12886368-2019 Plywood glued. Technical requirements.
SPECIFICATIONS OF UPG FILM FACED PLYWOOD
THICKNESS, MM 6-40
SURFACE TYPE Smooth/smooth (F/F), smooth/wiremesh (F/W), smooth/CP (F/CP)
FILM DENSITY, G/M2 120, 220
FORMALDEHYDE EMISSION CLASS E1
WATER RESISTANCE High
DENSITY, KG/M3 640-700
MOISTURE CONTENT, % 5-15
EDGE SEALING Acryl-based water resistant paint
Produced under TU 5512-002-12886368-2014 Film faced plywood. Technical requirements.
SPECIFICATIONS OF UPG FILM FACED PLYWOOD
FORMALDEHYDE EMISSION CLASS FORMALDEHYDE EMISSION
Requirement GOST 3916.1-2018 Average actual value 2020*
E1 From 1.5 to 3.5 inclusive, mg/m2h From 0.81 to 2.0 inclusive, mg / m2h
STRENGTH INDICATORS
INDEX REQUIREMENT GOST 3916.1-2018 REQUIREMENT EN 13986:2004 + A12015 EN 636:2012 + A12015 EN 314:1993 AVERAGE ACTUAL VALUE 2020*
Static bending strength for thicknesses of 6-40 mm, MPa, not less along the grain of face plies 25 not standardized 80
across the grain of face plies not standardized 70
Modulus of elasticity in static bending, MPa, not less along the grain 7 000 7 000 11 000
across the grain not standardized 8 000
Shear strength for shearing through adhesive layer (adhesive strength), MPa, not less after boiling in water for 6 hours 2
after soaking for 24 hours 2
Moisture content, % 5-10 6-9* Individual values of indicators may differ from the average both up and down.
Film Faced Plywood, Shuttering Plywood, Form Ply
sarkarplywood.com
https://sarkarplywood.com › products › film-faced-plyw…
Plywood pack made of veneers and cross band resin impregnated veneers. Face veneer on either side topped with phenol resin impregnated film. Pressed with …
PLYWOOD wire mesh – WELDE Lessocenter
welde-lessocenter.com
https://welde-lessocenter.com › catalog › PLYWOOD-wi…
PLYWOOD film faced PLYWOOD wire mesh PLYWOOD furniture SOLID WOOD furniture panels FLOORING engineered WALL paneling BSH beams / TIMBER material OSB …
Wiremesh Anti Slip Full Birch film Faced Plywood
Xuzhou Mega Industries
https://www.meijiawoodproducts.com › wiremesh-anti-sli…
Wire Mesh Birch Plywood is plywood coated with wear-resistant material and a special film. At least 4000 Taber test rotation wearing capacity) Wiremesh Birch …
Durable and Versatile Wire Mesh Film Faced Plywood for …
wanhangplywood.com
https://www.wanhangplywood.com › blog › durable-an…
Sep 5, 2024 — Wire Meshed Film Faced Plywood is a revolutionary product that has been changing the construction industry. It is a type of plywood that is …
PLYWOOD formwork and furniture I WELDE Lessocenter Film …
malaysianplywoodmdf.com
https://www.malaysianplywoodmdf.com › plywood-for…
Dec 11, 2024 — Film-faced Plywood with phenol film (film/film and film/wire-mesh) and various types of wood in the middle layers. Missing: Austria | Show …
Consmos18mm 21mm Wire Mesh Anti-slip Birch Film …
no.consmosplywood.com
http://no.consmosplywood.com › … › Film Faced Plywood
4×8 18mm PP Green Plastic Plywood Sheet For Concrete Formwork Advantage: 1.The biggest size of the film faced plywood is 1250x2500mm, which could decrease …
anti slip film faced plywood
plywoodeurope.com
https://www.plywoodeurope.com › anti-slip-film-faced-p…
ANTI SLIP FILM FACED PLYWOOD, wire mesh film faced plywood. … The patterns of the anti-slip side can be chose by customers and several kinds of patterns are …
What is Anti Slip Film Faced Plywood / Wire Mesh Brown Film …
Made-in-China.com
16 years ago
Purchase Qty. Reference FOB Price. 400-999 Pieces, US$17.70. 1,000+ Pieces, US$16.85. Sepcifications. Material …
Products
SFK Plywood
https://sfkplywood.com › products
Birch Film Faced Plywood (F/F). Mesh plywood (F/W) is a kind of laminated plywood that has two surfaces: smooth/mesh.
CrocPly
Austral Plywoods
https://www.australply.com.au › austral-crocply
220g/m2 black colour phenol film. Wire mesh pattern face, smooth back. Smooth face and back is available on request. Panels supplied with sealed edges. Tongue
EUROFANGROUPSIBERIA LLC
off 209, 7 Sr. Lenina
Anjero-Sudjensk
Kemerovo region 652470
RUSSIA
T: +79051720777
+971566668277
E: 434909@inbox.ru
W: www.plywoodeco.com
© www.plywoodeco.com 202280 Torgan Trail, Kleinburg, ON, L4H 3X6, Kleinburg On L4H 3X6 Canada
Aslan Trading International Export
Contact Time:
Mon-Sat: 9.00-19.00
Phone Number:
1-612-326-9882
Contact Mail:
info@aslantradinginc.com
homeabout usgroup companycontact
Plywood Sheet
The basics you need to know about Plywood is that it’s a sheet material which is brought to life by combining layers of wood veneer,
which are glued together. Each adjoining layer is rotated up to 90 degrees in a process we call cross-graining.
Why is this done? Well, the major reason is that it gives the product super strength. Thanks to cross-graining Plywood is able to resist splitting when nailed at the edges,
minimise expansion and shrinkage and bump up its stability. Similarly, when cross-graining an odd number of layers will be used.
This provides us with a balanced sheet that won’t easily warp.
For detailed information, please visit our website: : https://www.plywoodsheet.com
Playwood Sheet
FILM FACED PLYWOOD
Film faced Pywood is lightweight, resistant to corrosion attack and water, easily combined with other materials and easy to clean and cut.
Treating the film faced plywood’s edges with waterproof paint makes it highly water-and wear-resistant. Due to its durability and easily handled surface
it can be used in open environment in construction and building e.g. warehouses, railway wagons, floors and sidewalls of trucks etc
We use phenol formaldehyde in our product (WBP).
Tree Types: poplar, pine, birch, eyong ,okume, etc..
PLYWOOD
Standard plywood boards are composed of an odd number of thin veneers glued together under
pressure with the grain direction of the successive layers at right angles.
General purpose use for joinery, cabinet making, flooring.This hardwood non-structural plywood is suitable for a variety of general
construction applications including ceilings and wall linings. It can also be used in furniture, temporary hoardings, non-structural packaging,
kennels and more. Adequate sealing and wood treatment is recommended when used externally.
Tree Types: poplar, pine, birch, eyong ,okume, etc..
WIREMESH / HEXA PLYWOOD
Wood Floor is a wire mesh plywood used for flooring. The birch plywood is overlaid with multilayer phenol film with a rough wire mesh pattern.
The rough-surfaced Plywood Sheet Floor is a heavy-duty, multipurpose,
wire mesh plywood flooring panel for applications requiring a reliable, long-lasting anti-slip surface.
Akca Wood Floor is an ideal panel for transport applications that require highly wear-resistant and rough surfaces: van flooring,
truck and trailer flooring, bus flooring, train flooring, ship decking and transport platforms.
Akca Wood Floor can also be used in other heavy-duty flooring applications.
INSULATION PLYWOOD
Akca Sound boards are composite structures made out of plywood and sound absorbing material.
It is an ideal acoustic material for marine, railway and ground transportation.
Akca Sound is suitable for exterior and interior use. Lower fuel consumption reduced CO2 emissions can be achieved by using Plywood Sheet Sound.
The materials used in the board are free of hazardous substances such as PVC, heavy metals and formaldehyde.
For detailed information, please visit our website: : https://www.plywoodsheet.com/
Save
Address Canada
80 Torgan Trail, Kleinburg, ON, Canada.
1-437-770-8222
info@aslantradinginc.com
Mon – Sat: 9:00 – 19:00
Address USA
230 Grider St. Buffalo, NY 14215, USA
1-612-326-9882
info@aslantradinginc.com
Mon – Sat: 9:00 – 19:00
Aslan Trading International Export
OFF CANVAS MENU
Home
About Us
Group Company
Contact
