FILM FACED BIRCH PLYWOOD “MEGAPLEX”
Advantages of MEGAPLEX film faced plywood:
MEGAPLEX film faced plywood is WBP (exterior) birch plywood overlaid by a film (a thin paper treated with synthetic
resin) from one or both sides of a panel.
Using birch as raw material for plywood production gives exclusive strength properties to the ready-for-use
product. Using birch raw material for plywood production allows outstanding strength characteristics of the
product.
MEGAPLEX film faced plywood is recognized for its wear resistance and strength, high water-proof characteristics,
resistance to chemical agents and other corrosive liquids action, resistance to detergents and cleansers, safe
application.
Application of MEGAPLEX film faced plywood.
Building and construction, vehicle industry, wagon-building, tanker-building, hoardings, signs and
fencings, furniture and internal design.
Standard sizes, mm: 1500 x 2440 / 2500 / 2745 / 3000 / 3050
1525 x 2440 / 2500 / 2745 / 3000 / 3050
1200 x 2440 / 2500 / 3000 / 3050
1220 x 2440 / 2500 / 3000 / 3050
1250 x 2440 / 2500 / 3000 / 3050
2440 х 1220 / 1250
2500 х 1220 / 1250
Long and short grain panels are available. Other special sizes are available on request.
Standard thicknesses, mm: 6,5; 9; 12; 15; 18; 21; 24; 27; 30; 35; 40
Overlaying
Density
Face veneers of plywood are overlaid by phenol film.
Standard color is dark-brown, density – 120 gr/m2.
Double overlaying of the panel with standard films is (240 gr/m2, 440 gr/m2) which improves the panel wear
resistance.
Per request of the customer film of the following density can be used: 117 gr/m2, 167 gr/m2, 174 gr/m2, 205
gr/m2, 214 gr/m2 or 220 gr/m2.
Colour
Dark-brown transparent (120 gr/m2), dark-brown non-transparent (120 gr/m2), dark-brown (167 gr/m2),
dark-brown (220 gr/m2), chestnut-coloured (117 gr/m2), light-brown semi-transparent (117 gr/m2), yellow
(167 gr/m2), green (117 gr/m2), red (220 gr/m2), white (melamine film, 205 gr/m2), black (122 gr/m2), grey
(174 gr/m2), transparent film (117 gr/m2), under painting (291 gr/m2).
The LOGO print on film is possible.
Texture of the surface
F-smooth, W-wire mesh, SP-paper under painting.
Edge sealing
To improve the panel water resistance the edges are sealed with waterproof acrylic paint.