Film Face Ply
with Marine Glue

We have a range of Film Face plywood (similar to Formply)  It is made from Eucalyptus Timber for the core and with Marine glue with a Black Film Face overlay.

Sheet Size 2440 x 1220mm depending on availability or 2400 x 1200mm
Thicknesses  12, 18, 25mm

Film Face Plywood is produced to deliver a maintenance free surface, making it a versatile, ready to use surface that is easy to clean. This ply material is composed of a hardwood core, Marine glue and a black overlay finish.  This product is also ideal for cement applications where F14 structural strength is not required.
Many people will call this Formply, but it can only be called Formply when it has been stress graded, and will be stamped with a PAA  or EWPAA stamp.

NOTE  :-  Formply is NOT Marine ply.
Formply is normally made with pine timber and interior or water resistant glue.  Our ply is made using Eucalyptus timber and marine glue.

For the technical people :-
Formply, due to its short life as a structural member as concrete formwork, may be manufactured to either the structural plywood Standard AS/NZS2269 with Type A bond glue and B grade or better faces on two sides, or bonded with Type B water resistant glue to Australian Standard AS/NZS2271 or with interior Type C glue bond to AS/NZS2270 and B grade or better faces both sides.