Panel overlaid with faces MDO with 235 g/m2 both faces.
General Specifications
- Excellent use for marking highway signs easy to install and weather resistant.
- Both faces are overlaid with MDO of 235 g/m2.
- Its smooth surface is obtained for a process of “two step” , first a good sanding of the plywood and then the overlay is applied.
- High strength, light weight.
- 27% phenolic resin in MD0.
Size
Products, Features and Applications
- Avoid extreme temperatures and moisture.
- Always clean and dry the surface before painting.
- The paint priming coat is the most important hence, do not apply too thin of a priming coat. Oil/alkyd primers are recommended; latex primers also work well.
- No other surface preparation is needed.
- It is also recommended to seal the edge for an adequate protection against moisture penetration.
Thickness:
- 9 mm = 11 / 32”
- 12 mm = 15 / 32”
- 15 mm = 19 / 32”
- 18 mm = 23 / 32”
Dimensions:
- Width 1,220 m = 4′
- Length 2,440 m = 8′