Engineered Wood Products Association of
Australasia (EWPAA)
Our ACQ H3 & H4 Structural Plywood is manufactured to AS/NZS 2269 from plantation grown Hoop Pine and Klinki Pine veneers, using an “A” bond, WBP glue.
The product is certified by the Engineered Wood Products Association of Australasia (EWPAA)
Technical Information
| Standard | AS/NZS 2269 Structural Plywood |
| Sheet Dimensions | Length – 2400mm, Width – 1200mm Thickness 4, 6, 9, 12, 15, 17, 19 & 25mm |
| Veneer Grade | C Grade (Face) and D Grade (Back) |
| Stress Grade | F14 minimum |
| Treatment | ACQ H3 and H4 treatment is available. Full penetration treatment achieved. |
| Timber Species | Plantation grown Hoop Pine and Klinki Pine |
| Density | 14-20 kg/m2 |
| Moisture Content | 8% ~12% (despatch) |
| Tolerances | As per AS/NZS 2269 +/- 4% – sanded sheet over 7.5mm thick up to and including 17.5mm +/-3% – sanded sheet over 17.5mm thick |
| Glue | Phenolic Resin – AS 2754.1 |
| Bond | Type A – AS/NZS 2098.2, E0 formaldehyde emission class |
| Finish | Sanded one side (Face) . C faces may have small filled or sanded imperfections. D back may have rough patches or open splits. |
| Colour | Straw coloured in raw untreated state. |
| Edge Profile | Square Edged |
| Certification | Third party certification – Engineered Wood Products Association of Australasia (EWPAA) |
