Plywood with foil or aluminium plate is glued with an odd or even number of veneer layers. Foil or aluminium sheet is one of the middle layers of the plate (it is usually the third layer).
Plywood can be made both from pine and hardwood species (birch, alder, beech).
By using a very thin aluminium foil (0.03 mm) machining by cutting, milling, drilling, etc. does not cause any problems and does not require the use of special tools. We also offer plywood with aluminum sheet of 0.3 mm.
As in the case of general-purpose plywood, plywood with foil or aluminium plates are made in two versions:
standard – combi plywood
Special design – with special construction and quality of the inner layers (e. g. pine in full cross section or full internal layers (for milling), etc.).
On special order, we can make the processing or refining of plywood.
| Plywood type | Pine, or hardwood waterproof – melamine |
| Quality class | I/III, II/III, or others to be agreed |
| Format (mm) | 2500 x 1250, or others to be agreed |
| Thickness (mm) | 4 – 24 |
| Specific density (kg/m³) | 560 – 750 |
| Bending strength (MPa) | 50 – 100 |
