MEGA-Parquet Eucalyptus is the most suitable softwood plywood for the needs of the parquet industry. Constructions can be designed according to the customer’s technical requirements, and the panel is suitable for use as core material for two-layer parquets. Panel thicknesses available are with 0.1 mm deviation from 5.0 mm to 18.0 mm.
Properties
- Constructions according to the customer’s technical requirements
- Thicknesses available with 0.1mm deviation from 5.0 mm to 18.0 mm
End-uses
- Two-layer parquet
Bonding
Phenolic resin cross-bonded weather resistant glueing according to EN 314-2 class 3
exterior. The phenol formaldehyde glued MEGA-Parquet Spruce fulfils the requirements
of EN 1084/Class A (E1) for formaldehyde emissions. On request deliveries according to
CARB Phase ULEF/ JAS four stars.
Surface and edges
Top surface: Special parquet grade P, or standard II,III (EN 635-3, Classification by surface appearance)
Reverse side: same as top surface
Panel size
Standard plywood panel sizes. Cut sizes according to customer needs. Minimum cut size 75 x 270 mm.
Thickness
Thicknesses 5-15 mm, are according to customer needs.